This project is somewhat of a tester for me, it started a few weeks ago when me and my girlfriend, Emily, were walking back from the 86th and Lex station. She'd been crashing at my place for a while and it was becoming abundantly clear that if she were to stay I was going to need more places to put the massive influx of general "things" that came with her.
I spotted a small bedside table on the street next to a collection of other bits of related furniture. All the pieces were in good shape, but all were too much more then I could, myself, lugg. So I hefted the thing the four more blocks to my apartment, and stuck it in a corner next to the wall. I figured it'd be a good project for when she wasn't around.
Well, like all things Em's existence had to come to a close, as she decided to jet off to Minnesota for a spit (no worries, she'll be back) and my time opened wide up.
So what to do with this:
It's pretty ugly on it's own, in that sort of aimless, directionless ugly. Assuming you're not able to tell from the resolution, the damn thing is sub-Ikea grade composite furniture, covered in a wood laminate picture.
It's non offensive, but not nearly desirable.
I've no idea what to do with this thing, except paint it. I was thinking about maybe rebuilding part of the structure with some of my misc wood, something to give it some spice, but nothing about this screamed for me to do it, so I figured; to hell with it, I'l waste my creativity, with regards to construction, elsewhere.
Now, here is a point where I comment on my limitations in working in a studio apartment, without most tools or ways to clean:
I've no saws or vacuums, and whatever I do must necessarily be cheaper then buying a pre-made version of what I desire to see. Some might say the process, if I enjoy it, should be worth the expense. But those people are mistake, slightly retarded even, as if i bought the object i desire to see (assuming i could) it'd be much better to have a returnable item, then a shit ugly mistake.
Anyways, if I wanted to paint the damn thing, I'd need to go get paint. Here's where I can comment on the perks of living in Manhattan: Everything, (almost everything) is a train stop or two away. This includes the HomeDepot at 59th and 3rd. I've always been a home depot shopper, i worked for them for nearly a year and a half, and I've got to say, they've always got a decent selection. if you know how to thrifty shop, you can knick any color of paint for essentially nothing, good paint too.
I bought 4 8oz bottles, testers really, for 50 cents each. They came from the oops bin. Places like Home depot often have spots where, for virtually nothing, one can by any size container of pre-colored paint. I went with the Behr 2-in-1, partly because they were the options available and partly because when i do work, I listen to T.V. shows off of Hulu, and HomeDeopt has been running a commercial for them for like 3 months non-stop and I'm fairly sure I can, and likely have been, reciting it in my sleep, subconsciously advertising to the empty other side of the bed.
Just kidding, I sleep in the middle, there is no side to speak of.
So anyways, the first step was to remove the drawer and related hardware.
whabam- that was easy.
Next step was to give it a first coat: I used a color called Starless Night, flat, base paint, and gave it two coats over one night, allowing for basically 2 hours drying in between. I'd give more, but i get bored easily, and this was my distraction from my homework.
Two coats on, and the thing was looking better. I decided not to sand it, as the sanding might be too much in a small apartment, the particulate may be overloading, and frankly it wasn't worth it.
I roughed up the top after the first coat, partially because the first coat was not thick enough to cover existing dings, and partially because I wanted to make the piece look a bit beat up artistically.
I've wanted to try the roughed up, shabby chic as it's formally known, look to a piece of furniture for quite some time. So after the first coat had been applied, I took a piece of random wood, and scratched a few marks into the top of the table. The idea was that it would give texture to the surface, maybe building a multi planed distortion. Idk, it kinda worked, but i'd need to build it a lot more to give it the effect i wanted, so I figured i'd do it some other time.
I've done the layers thing with spray paint before, it required an exacto knife and some tape, but you can build layer with spray paint that hold pretty darn well. I'll post a picture later to that effect.
Anyways, I moved next to the design phase. From what I've observed for shabby chic, you need to roughly, and inconsistently apply a contrasting color to the edges of the piece, so that the eye is tricked to believe that the fixture was worn incrementally over time.
Noting my limited array of colors, (since i only grabbed 4 from the oops pile) I used a off while and pale cream. Applying along the edges with short and rapid brush strokes, I worked to maintain some semblance of a line but tried to make that line jagged.
Note how the edges are followed, i used the lines given by the furniture to dictate how the lines should be played out on the top, sides and bottom.
No comments:
Post a Comment